[benhurpaz]

Boa Noite Wanilton?

O senhor tem alguma informação de previsão de lançamento do KodiBuntu: Isengard 15 32bit?

[Wanilton]

Baseado no que consta na área de download do kodibuntu

xbmcbuntu necessita uma atualização manual para versão 15.0 nigthlies, que está disponível em Ubuntu nightlies-PPA. Este ISO não é compatível com EFI, somente com BIOS.

Eis o texto em inglês
XBMCbuntu needs a manual update to 15.0 nightlies, which are now available on the Ubuntu nightlies-PPA. This ISO is not compatible with EFI, only with BIOS.

Pelo que sei os comandos para atualizar são, proceda por conta e risco, via terminal

sudo apt-get update
sudo apt-get install update-manager-core
sudo do-release-upgrade

[benhurpaz]

Onde é que eu acho o terminal,  para executar o comandos via terminal?


sudo apt-get update
sudo apt-get install update-manager-core
sudo do-release-upgrade

[Wanilton]

vá ao menu Aplicações > Acessórios > Terminal ou pressione simultaneamente as teclas Alt+F2, e na caixa de texto digite "gnome-terminal" e tecle “Enter”. Isto é válido para ubuntu, logo deve funcionar.

Terminal é igual ao prompt do ms-dos, todos os comandos são digitados seguidos de enter

aprendendo comandos básicos linux

http://www.ubuntubrsc.com/aprendendo-alg...linux.html

Caso queira compilar eis os procedimentos

OC

1. Introduction
2. Getting the source code
3. Installing the required Ubuntu packages
4. How to compile
5. Uninstalling

-----------------------------------------------------------------------------
1. Introduction
-----------------------------------------------------------------------------

A graphics-adapter with OpenGL acceleration is highly recommended.
24/32 bitdepth is required along with OpenGL.

Note to new Linux users.
All lines that are prefixed with the '$' character are commands, that need to be typed
into a terminal window / console (similar to the command prompt for Windows).
Note that the '$' character itself should NOT be typed as part of the command.

-----------------------------------------------------------------------------
2. Getting the source code
-----------------------------------------------------------------------------

.0  $ cd $HOME
.1  $ git clone git://github.com/xbmc/xbmc.git kodi

Note: You can clone any specific branch.

.1  $ git clone -b <branch> git://github.com/xbmc/xbmc.git kodi

-----------------------------------------------------------------------------
3. Installing the required Ubuntu packages
-----------------------------------------------------------------------------

Two methods exist to install the required Ubuntu packages:

[NOTICE] For supported older Ubuntu versions, some packages might be outdated.
         For those, you can either compile them manually, or use our backports
         available from our official stable PPA:

         http://launchpad.net/~team-xbmc/+archive/ppa

-----------------------------------------------------------------------------
3a. Use a single command to get all build dependencies
-----------------------------------------------------------------------------
[NOTICE] Supported on Ubuntu >= 11.10 (oneiric)

You can get all build dependencies used for building the packages on the PPA

Add the unstable and build-depends PPAs:
.0  $ sudo apt-get install python-software-properties software-properties-common
.1  $ sudo add-apt-repository ppa:team-xbmc/xbmc-nightly
.2  $ sudo add-apt-repository ppa:team-xbmc/xbmc-ppa-build-depends
.3  $ sudo apt-get update

Here is the magic command to get the build dependencies (used to compile the version on the PPA).
    $ sudo apt-get build-dep kodi

Optional: If you do not want Kodi to be installed via PPA, you can removed the PPAs again:
    $ sudo add-apt-repository -r ppa:team-xbmc/xbmc-nightly
    $ sudo add-apt-repository -r ppa:team-xbmc/xbmc-ppa-build-depends

Note: Do not use "aptitude" for the build-dep command. It doesn't resolve everything properly.
      For developers and anyone else who compiles frequently it is recommended to use ccache
    $ sudo apt-get install ccache

Tip: For those with multiple computers at home is to try out distcc
    (fully unsupported from Kodi of course)
    $ sudo apt-get install distcc

-----------------------------------------------------------------------------
3b. Alternative: Manual dependency installation
-----------------------------------------------------------------------------

For Ubuntu (all versions >= 7.04):

    $ sudo apt-get install automake bison build-essential cmake curl cvs default-jre fp-compiler gawk gdc gettext git-core gperf libasound2-dev libass-dev libboost-dev libboost-thread-dev libbz2-dev libcap-dev libcdio-dev libcurl3 libcurl4-gnutls-dev libdbus-1-dev libenca-dev libfontconfig-dev libfreetype6-dev libfribidi-dev libgif-dev libglew-dev libiso9660-dev libjasper-dev libjpeg-dev liblzo2-dev libmad0-dev libmicrohttpd-dev libmodplug-dev libmpeg2-4-dev libmpeg3-dev libmysqlclient-dev libnfs-dev libogg-dev libpcre3-dev libplist-dev libpng-dev libpulse-dev libsdl2-dev libsmbclient-dev libsqlite3-dev libssh-dev libssl-dev libtiff-dev libtinyxml-dev libtool libudev-dev libusb-dev libvdpau-dev libvorbisenc2 libxml2-dev libxmu-dev libxrandr-dev libxrender-dev libxslt1-dev libxt-dev libyajl-dev mesa-utils nasm pmount python-dev python-imaging python-sqlite swig unzip yasm zip zlib1g-dev

For >= 10.10:
    $ sudo apt-get install autopoint libltdl-dev

For >= 12.04 lts: Backport for Precise of libyajl2
& sudo-add-apt-repository ppa:team-xbmc/xbmc-nightly
& sudo apt-get install libyajl-dev

For >= 12.10:
$ sudo apt-get install libtag1-dev

On 8.10 and older versions, libcurl is outdated and thus Kodi will not compile properly.
In this case you will have to manually compile the latest version.
    $ wget http://curl.sourceforge.net/download/curl-7.19.7.tar.gz
    $ tar -xzf curl-7.19.7.tar.gz
    $ cd curl-7.19.7
    $ ./configure --disable-ipv6 --without-libidn --disable-ldap --prefix=/usr
    $ make
    $ sudo make install

For <= 12.04
Kodi needs a new version of taglib other than what is available at this time.
We supply a Makefile in lib/taglib to make it easy to install into /usr/local.
    $ sudo apt-get remove libtag1-dev
    $ make -C lib/taglib
    $ sudo make -C lib/taglib install

or use prepackaged from the Kodi PPA.

    $ sudo apt-get install libtag1-dev

Unless you are proficient with how Linux libraries and versions work, do not
try to provide it yourself, as you will likely mess up for other programs.

-----------------------------------------------------------------------------
4. How to compile
-----------------------------------------------------------------------------
See README.linux

-----------------------------------------------------------------------------
4.1. Test Suite
-----------------------------------------------------------------------------
See README.linux

-----------------------------------------------------------------------------
5. Uninstalling
-----------------------------------------------------------------------------
Remove any PPA installed Kodi.
    $ sudo apt-get remove kodi* xbmc*

See README.linux/Uninstalling for removing compiled versions of Kodi.

[Wanilton]

Como compilar em linux

TOC

1. Introduction
2. Getting the source code
3. Installing the required libraries and headers
4. How to compile
5. How to run
6. Uninstalling

-----------------------------------------------------------------------------
1. Introduction
-----------------------------------------------------------------------------

A graphics-adapter with OpenGL acceleration is highly recommended.
24/32 bitdepth is required along with OpenGL.

Note to new Linux users.
All lines that are prefixed with the '$' character are commands,
that need to be typed into a terminal window / console. The '$' equals the prompt.
Note: The '$' character itself should NOT be typed as part of the command.

-----------------------------------------------------------------------------
2. Getting the source code
-----------------------------------------------------------------------------

You will have to grab the source code of course, here we use git as example.
First install the git package provided by your distribution.
Then from a terminal, type:

.0  $ cd $HOME
.1  $ git clone git://github.com/xbmc/xbmc.git kodi

Note: You can clone any specific branch.

.1  $ git clone -b <branch> git://github.com/xbmc/xbmc.git kodi

-----------------------------------------------------------------------------
3. Installing the required libraries and headers
-----------------------------------------------------------------------------

You will then need the required libraries. The following is the list of packages
that are used to build Kodi packages on Debian/Ubuntu (with all supported
external libraries enabled).

Build-Depends: autoconf, automake, autopoint, autotools-dev, cmake, curl,
  debhelper (>= 7.0.50~), default-jre, gawk, gperf, libao-dev, libasound2-dev,
  libass-dev (>= 0.9.8), libavahi-client-dev, libavahi-common-dev, libavcodec-dev,
  libavfilter-dev, libavformat-dev, libavutil-dev, libbluetooth-dev, libbluray-dev,
  libboost-dev, libboost-thread-dev, libbz2-dev, libcap-dev, libcdio-dev, libcec-dev,
  libcurl4-gnutls-dev | libcurl4-openssl-dev | libcurl-dev, libcwiid-dev, libdbus-1-dev, 
  libenca-dev, libfontconfig-dev, libfreetype6-dev, libfribidi-dev, libgif-dev (>= 4.1.6), 
  libgl1-mesa-dev | libgl-dev, libglew-dev, libglu1-mesa-dev | libglu-dev, libiso9660-dev,
  libjasper-dev, libjpeg-dev, libltdl-dev, liblzo2-dev, libmad0-dev, libmicrohttpd-dev,
  libmodplug-dev, libmpcdec-dev, libmpeg2-4-dev, libmysqlclient-dev, libnfs-dev, libogg-dev,
  libpcre3-dev, libplist-dev, libpng12-dev | libpng-dev, libpostproc-dev, libpulse-dev,
  librtmp-dev, libsdl2-dev, libshairplay-dev, libsmbclient-dev, libsqlite3-dev, libssh-dev,
  libssl-dev, libswscale-dev, libtag1-dev (>= 1.8), libtiff-dev, libtinyxml-dev (>= 2.6.2), libtool,
  libudev-dev, libusb-dev, libva-dev, libvdpau-dev, libvorbis-dev, libxinerama-dev,
  libxml2-dev, libxmu-dev, libxrandr-dev, libxslt1-dev, libxt-dev, libyajl-dev (>=2.0),
  lsb-release, nasm [!amd64], python-dev, python-imaging, python-support, swig, unzip,
  yasm, zip, zlib1g-dev
  
Note: For developers and anyone else who compiles frequently it is recommended to use ccache.

   $ sudo apt-get install ccache

-----------------------------------------------------------------------------
3.1. Using the Kodi PPA to get all build dependencies (Debian/Ubuntu only)
-----------------------------------------------------------------------------

For this, you need to specify the PPA in your apt sources.
Please find them on the following wiki link:
Note: See README.ubuntu as well

http://kodi.wiki/index.php?title=Official_Ubuntu_PPA

Update apt:
   $ sudo apt-get update

The command to get the build dependencies, used to compile the version on the PPA.

   $ sudo apt-get build-dep kodi

-----------------------------------------------------------------------------
4. How to compile
-----------------------------------------------------------------------------

To create the Kodi executable manually perform these steps:

.0  $ ./bootstrap

.1  $ ./configure <option1> <option2> ... (See --help for available options)
       A full listing of supported options can be viewed by typing './configure --help'.

.2  $ make

Tip: By adding -j<number> to the make command, you describe how many
     concurrent jobs will be used. So for dualcore the command is:

    $ make -j2

Note: From v14 with commit 4090a5f a new API for binary audio encoder and pvr addons is available, if you need to compile them do:    
   
    $ make -C tools/depends/target/xbmc-audioencoder-addons PREFIX=/<system prefix you added on step 4.1>
    $ make -C tools/depends/target/xbmc-pvr-addons PREFIX=/<system prefix you added on step 4.1>

.3  $ make install

This will install Kodi in the prefix provided in 4.1 as well as a launcher script.

Note: You may need to run this with sudo (sudo make install) if your user doesn't have write permissions
to the prefix you have provided (as in the default case, /usr/local).

Tip: To override the location that Kodi is installed, use PREFIX=<path>.
For example.

    $ make install DESTDIR=$HOME/kodi

-----------------------------------------------------------------------------
4.1. Test Suite
-----------------------------------------------------------------------------

Kodi has a test suite which uses the Google C++ Testing Framework.
This framework is provided directly in Kodi's source tree.
It has very little requirements, in order to build and run.
See the README file for the framework at 'lib/gtest/README' for specific requirements.

To compile and run Kodi's test suite:
The configure option '--enable-gtest' is enabled by default during the configure stage.
Once configured, to build the testsuite, type the following:

    $ make check

To compile the test suite without running it, type the following.

    $ make testsuite

The test suite program can be run manually as well.
The name of the test suite program is 'xbmc-test' and will build in the Kodi source tree.
To bring up the 'help' notes for the program, type the following:

    $ ./xbmc-test --gtest_help

The most useful options are,

    --gtest_list_tests
      List the names of all tests instead of running them.
 The name of TEST(Foo, Bar) is "Foo.Bar".
      
    --gtest_filter=POSTIVE_PATTERNS[-NEGATIVE_PATTERNS]
      Run only the tests whose name matches one of the positive patterns but
      none of the negative patterns. '?' matches any single character; '*'
      matches any substring; ':' separates two patterns.

Note: If the '--enable-gtest' option is not set during the configure stage,
the make targets 'check,' 'testsuite,' and 'testframework' will simply show a message saying
the framework has not been configured, and then silently succeed (i.e. it will not return an error).

-----------------------------------------------------------------------------
5. How to run
-----------------------------------------------------------------------------

How to run Kodi depends on the type of installation you have done.
It is possible to run Kodi without the requirement to install Kodi anywhere else.
In this case, type the following from the top source directory.

    $ ./kodi.bin

Or run in 'portable' mode

    $ ./kodi.bin -p

If you chose to install Kodi using '/usr' or '/usr/local' as the PREFIX,
you can just issue 'kodi' in a terminal session.

If you have overridden PREFIX to install Kodi into some non-standard location,
you will have to run Kodi by directly running 'kodi.bin'.

For example:

    $ $HOME/kodi/usr/lib/kodi/kodi.bin

You should still run the wrapper via
    $ $PREFIX/bin/kodi

If you wish to use VDPAU decoding you will now have to change the Render Method
in Settings->Videos->Player from "Auto Detect" to "VDPAU".

-----------------------------------------------------------------------------
6. Uninstalling
-----------------------------------------------------------------------------

Issue the commands prepending "sudo", if your user doesn't have write permission,
to the install directory.

Note: If you have rerun configure with a different prefix,
you will either need to rerun configure with the correct prefix for this step to work correctly.

    $ make uninstall
.0  $ sudo make uninstall

If you would like to also remove any settings and 3rd party addons (skins, scripts, etc)
you should also run:

.1  $ rm -rf ~/.kodi

[benhurpaz]

Boa noite, sr. Wanilton


Fiz como descrito compilei em linux e deu tudo certo.